RESEARCH OF THE PARAMETER OF THE CUTTING PARTS AFFECTING THE YIELD OF THE MAIZE SLICER
DOI:
https://doi.org/10.51453/2354-1431/2021/537Keywords:
Cutting unit, chopper productivity, cutting edge profile, slip angle, clamp angle.Abstract
The corn trunk chopper machine plays an important role in the processing of by-products after the harvest to take economic advantage and ensure the safety and adequate food reserved for the whole year, especially in the winter and rainy season in the northern provinces of Vietnam. The main working part of the chopper is the slicing unit using a chopping cutter with the working parameters including the cutting drum radius rt, the length of cutting blade Lcg, the angle of the cutting blade a, the cutting-edge profile. This study determines the optimal parameters of the chopping cutter improve productivity. Besides, the study also opens up the possibility of application in manufacturing other types of cutting knives for agricultural products such as cassava, banana, elephant grass...
Downloads
References
[1] Nhat, D.V. (2019). Research to determine some basic parameters of plastic shredders for recycling. Journal of Science and Technology in Civil Engineering (Science and Construction)-University of Construction, 13(3V): 91-98, Vietnam.
[2] Tien, N.V., Tung, N.D. (2018). Study the effect of some structural parameters on the high-yield 10-20 ton/h fresh cassava chopping/slicing machine by experimental planning model. The 5th national scientific conference on mechanical engineering, 189, Vietnam.
[3] Cao D.V. (2009). Research, design, and manufacture a machine to chop fresh corn stalks as fermenting feed for cows with a yield of 35 tons/day. Scientific research project at ministerial level, Ministry of Industry and Trade, Vietnam.
[4] Tam, N.V. (2015). Study on some key parameters as a basis for designing the straw cutting unit associated with the threshing machine. Doctoral thesis in mechanical engineering, Vietnam.
[5] Ngan, N.H. (2010). Research and design of fiber and fiber cutting machines as aggregates for composites. Journal of science and technology, 13 (K3):37-48, Vietnam.
[6] Long, B.T., Luc, T.S., Sy, T. (2010). Bag. Design Industrial Tools. Science and Technology Publishing House, Vietnam.
[7]. Yiljep, Y. D., Mohammed, U. S. (2005). Effect of knife velocity on cutting energy and efficiency during impact cutting of sorghum stalk. Agricultural Engineering International: CIGR Journal.
[8]. Qiu, J., Wu, M., Guan, C., Fang, Y., Li, X. (2015). Design and experiment of chopping device with dynamic fixed knife coaxial for rice straw. Transactions of the Chinese Society of Agricultural Engineering, 31(10): 11-19.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All articles published in SJTTU are licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) license. This means anyone is free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided they give appropriate attribution to the original author(s) and SJTTU, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SJTTU to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.
Although the conditions of the CC BY-SA license don't apply to authors (as the copyright holder of your article, you have no restrictions on your rights), by submitting to SJTTU, authors recognize the rights of readers, and must grant any third party the right to use their article to the extent provided by the license.
